Tesla Model S Battery Health Reports & Testing Guide

Model years
2012 – 2015
Vehicle type
Electric Vehicle (EV)

Where is the Tesla Model S OBD port?

Tesla Model S OBD-II diagnostic port location
Tesla Model S (2012 – 2015) diagnostic port

How to test Tesla Model S battery health

Watch: testing a Tesla Model S with the vsNEW device

Common Tesla Model S battery issues to look for

One of the most common HV battery failure modes is caused by cell imbalance issues, where either a single cell or a group of cells are not able to hold as much charge as the rest of the cells in the battery pack. This can develop as a result of -

1) stress to the battery from excessive supercharging or extremely low temperature charging

2) natural aging

3) manufacturing defects

In these cases, if additional energy goes into a cell that cannot hold additional charge, that energy is released as heat. In extreme cases, that excess heat can lead to thermal runaway and a catastrophic battery fire.

The good news is that BMSs are constantly monitoring for cell imbalances to prevent overcharging cells. However, if a BMS detects an imbalance issue, it will throw one of several codes on the screen - BMS_u018, BMS_u029, BMS_a079, or BMS_a074, and will restrict the maximum charge level of the battery to a maximum of 50% SOC or even as low as 30% SOC. The vehicle is still drivable in this state - and is safe to operate - but you will have a fraction of your original range. Often, Tesla's solution is a complete battery replacement, even if the root cause is a single cell.

vsNEW checks for early signs of cell imbalance issues, acting like an early warning system. For best results, we work with EV service shops that can conduct a full battery test under load, along with a visual inspection to give you a complete analysis.

Example Tesla Model S battery health report

View the full example report

Other Tesla Model S model years

← All supported vehicles